|
| |
Powerwashing Page
Sorry! This page is currently under construction!
Boat pressure washing is something that should be done at least on an annual
basis. Our staff are experienced in cleaning the hulls with our professional
washing system. If you are pressure washing your own boat, here are a few tips:
Insure all windows and hatches are closed and well sealed
Insure the water exits on the boat are working properly
Remove any items you don’t want to get wet (outdoor carpets etc…)
Make sure you have a means to get rid of excess water before you start power
washing
Make sure the area is clean to insure you don’t track it back in the boat
upon entry
Make sure the spray is 90 degrees to the surface for best results
Clean in small 3 to 4 foot sections keeping the nozzle perpendicular to the
area
Start with the highest point of the boat area being cleaned
Rinse the areas cleaned to remove the cleaning solutions because, in many
cases, there are specified times for the cleaning agents to be on the hull
surfaces
When washing dock lines, apply plenty of water with no detergents
Topsides are done last
If your boat is equipped with the waterways, pull the plugs out to get rid
of the water
use a squeegee and absorber to dry
Windows are cleaned separately with the appropriate solution
|
Marine systems Phone# 604 985 5326
Fax# 604 986 1213 email
address: